American Standard Culinaire 18

Maintenance for stainless steel sinks:

Please have the following in mind:

Discoloration

7 9 0 7 6 6 - 1 0 0

4

To keep the original quality of your Stainless Steel Sink, we recommend regular cleaning. Use a mild liquid dish 
detergent and water to clean the product after use. Rinse carefully and dry.

More stubborn spots are often caused by impurities in the water or household substances. These can be removed 
with special polish agents for stainless steel. Dull spots can become lustrous again if rubbed with chalk on a soft 
cloth.

Do not let water or other liquids dry on the product. Liquids that are left to dry leave a grey build-up stain on 

the steel.

Stainless steel can stand hard treatment, but sharp objects can easily scratch the surface. These scratches 

are more visible when the product is new. After a period of use these marks will be smoothed out without the 
product losing it luster.

Never use scouring powder or steel wool to clean the surface. Apart from the risk of scratches, there is also a 

risk that rust stains will attack the steel.

Avoid Chlorine-based solutions from coming into contact with the stainless steel.

Silver polish leaves spots that cannot be removed.

Acidic foods (e.g. juices, salt, mustard, mayonnaise, etc.) must be cleaned up immediately.

AMERICAN-STANDARD LIMITED LIFETIME WARRANTY FOR STAINLESS STEEL SINKS

American-Standard warrants to the original purchaser consumer of an American-Standard stainless steel sink that it will, at its option, 
repair or replace such product if it is found by American-Standard, in its sole judgment, to be defective under normal residential use, 
provided that it has been installed and maintained in accordance with American-Standard's instructions.  This limited warranty applies 
only to the initial installation and is not transferable from the original consumer purchaser. In the event of a limited warranty claim, 
proof of purchase will be required – save sales receipt.

This limited lifetime warranty DOES NOT COVER the following:

1. Defects or damages arising from shipping, installation, alterations, accidents, abuse, misuse, environmental factors, lack of proper 
maintenance and use of other than genuine American Standard replacement parts, in all cases whether caused by a plumbing 
contractor, service company, the owner or any other person.
2. Deterioration through normal wear and tear and the expense of normal maintenance.
3. Commercial application. 
4. Options and accessories.  American-Standard’s limited warranty on these items is one year for parts only.  This one year limited 
warranty covers accessories manufactured by American-Standard against defects of material or workmanship.  Limited warranty 
coverage begins on the date the accessory was originally purchased by the owner. 
5. Postage or shipping costs for returning products for repairs or replacement under this limited warranty and labor or other costs 
incurred in connection with product removal or installation under this limited warranty.
6. ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING LABOR, ALL OF WHICH ARE HEREBY 
EXPRESSLY DISCLAIMED, OR THE EXTENSION BEYOND THE DURATION OF THIS LIMITED WARRANTY OF ANY IMPLIED 
LIMITED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR AN INTENDED PURPOSE.  IN NO 
EVENT WILL AMERICAN STANDARD BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF ANY INSTALLATION 
MATERIALS INCLUDING BUT NOT LIMITED TO TILES, MARBLE ETC. (Some jurisdictions do not allow limitations on how long an 
implied limited warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions 
may not apply to you.)
7. Responsibility for compliance with local code requirements.  (Since local code requirements vary greatly distributors, retailers, 
dealers, installation contractors and users of plumbing products should determine whether there are any code restrictions on the 
installation or use of a specific product.) 

This limited warranty gives you specific legal rights.  You may have other legal rights that vary from state to state or from province to 
province.

In the United States:
American Standard Inc.,
P.O. Box 6820
Piscataway, New Jersey, 08855
Attention: Director of  Consumer Affairs

For residents of the United States,
warranty information may also be
obtained by calling the following
toll free number: (800) 223-0068

In Canada:
American-Standard,
2480 Stanfield Road
Mississauga, Ontario
Canada L4Y 1S2

Toronto Area: (905) 306-1093
Toll Free: (800) 387-0369  

In Mexico:
Ideal Standard, S.A. de C.V.
Planta Santa Clara
Via Morelos #330
Santa Clara Coatitla
Ecatepec de Morelos 55540,
Estado de Mexico, Mexico

Содержание Culinaire 18" Island Bowl 7507.103









Отзывы: