American Standard 4A6V8024A1000B, Сервисные данные

Страница: 8 / 76

8 4A-V8-SF-1G-EN
Air Conditioner Models
OUTDOOR UNIT (a) (b)
4A7V8048A1000B 4A7V8060A1000B
POWER CONNS. — V/PH/HZ (c) 208/230/1/60 208/230/1/60
MIN. BRCH. CIR. AMPACITY 23.0 27.0
BR. CIR. PROT. RTG. — MAX. (AMPS)
35 40
COMPRESSOR SCROLL SCROLL
NO. USED — NO. SPEEDS 1–VARIABLE 1–VARIABLE
R.L. AMPS (d) — L.R. AMPS
16.0 — 12.0 19.3 — 12.0
FACTORY INSTALLED
START COMPONENTS (e)
NA NA
INSULATION/SOUND BLANKET YES YES
COMPRESSOR HEAT YES YES
OUTDOOR FAN
DIA. (IN.) — NO. USED
27.5 — 1 27.5 — 1
TYPE DRIVE — NO. SPEEDS DIRECT — VARIABLE DIRECT — VARIABLE
CFM @ 0.0 IN. W.G. (f)
4560 4787
NO. MOTORS — HP
1 — 1/3 1 — 1/3
MOTOR SPEED R.P.M. 200 — 1200 200 — 1200
VOLTS/PH/HZ 208/230/1/60 208/230/1/60
F.L. AMPS 2.8 2.8
OUTDOOR COIL — TYPE SPINE FIN™ SPINE FIN™
ROWS — F.P.I. 1 — 24 1 — 24
FACE AREA (SQ. FT.)
27.87 30.80
TUBE SIZE (IN.) 3/8 3/8
REFRIGERANT R410–A R410–A
LBS. — R-410A (O.D. UNIT) (g)
11 lb — 1 oz 11 lb — 14 oz
FACTORY SUPPLIED YES YES
LINE SIZE — IN. O.D. GAS
7/8 (h) 1 – 1/8 (h)
LINE SIZE — IN. O.D. LIQ. (h) 3/8 3/8
CHARGING SPECIFICATIONS
SUBCOOLING 10° 10°
DIMENSIONS H X W X D H X W X D
CRATED (IN.)
46.4 X 35.1 X 38.7 51 X 35.1 X 38.7
WEIGHT
SHIPPING (LBS.)
270 284
NET (LBS.)
245 258
(a)
Certified in accordance with the Air-Source Unitary Air-conditioner Equipment certification program, which is based on AHRI standard 210/240.
(b) Rated in accordance with AHRI standard 270/275.
(c) Calculated in accordance with Natl. Elec. Codes. Use only HACR circuit breakers or fuses.
(d) This value shown for compressor RLA on the unit nameplate and on this specification sheet is used to compute minimum branch circuit ampacity and max.
fuse size. The value shown is the branch circuit selection current.
(e) No means no start components. Yes means quick start kit components. PTC means positive temperature coefficient starter.
(f) Standard Air — Dry Coil — Outdoor
(g) This value approximate. For more precise value see unit nameplate.
(h) Max length of refrigerant lines from outdoor to indoor unit MUST NOT exceed 80 feet. The max vertical change MUST NOT exceed 25 feet. See footnote (h)
if 7/8” suction line is used.
P Prro od du ucctt S Sp pe ecciiffiicca attiio on nss