OWNERS MANUAL
9
Alcove Installation
`
Faucet and Pump
Access Panels
IMPORTANT
Do not use tile flange to
screw or nail tub in place.
Tubs installed in an alcove installation require a raised flange to prevent water from seeping past the tub and into
the wall. Tubs without a raised flange shall be installed with a tile flange kit model TFK-60. The flange kit is a
long plastic strip that is fits onto the rim of the tub to provide the leak protection needed.
The tile flange should be installed on the tub before it is placed in the alcove. Install the tile flange along all sides
of the tub where the wall will be. Measure to fit and miter cut the flange corners. The flange should be attached to
the tub with a construction adhesive. Once the tub is in place to be installed and flange kit mounted, fasten the
flange to studs using galvanized fasteners
Warning:
Never attempt to nail or screw thru the tub as this will result in product failure and will void the
warranty.
Non Integral Flange
Integral Flange
Model
A
B
C
D
E
F
G
2651.110
50.5”
26 ¼”
37 ½”
9 ½”
11 ½”
15 ½”
N/A
2848.100
48”
28”
38”
10 ¾”
14”
16 ¾”
N/A
3051.110
50.5”
30 ½”
37 ½”
9 ½”
14½”
15 ½”
N/A
3260.210
59 ½”
32
37
11 ½”
16”
20½”
N/A