American Sanders AVac 26 07213A, Руководство оператора

Страница: 20 / 40

20
PROBLEM POSSIBLE CAUSE SOLUTION
The Machine W
ill
Not T
urn On
The main switch is in the off position. Turn on the main switch.
The power cable extension is not connected
to the machine.
Connect the power cable plug to the main socket.
The appliance’s electronic specifications do
not match the mains supply specifications.
Check that the technical information on the serial
number plate. correspond to the mains supply
information.
The power cable is damaged.
If the power cable is damaged replace it, immediately
contact an authorized the technical services of an
American Sander distributor.
Dust Coming Out During Operation
The vacuum hose is not properly connected
to the vacuum nozzle.
Connect the vacuum hose to the nozzle on the
collection tank.
The vacuum hose is not properly connected
to the accessory in contact with the floor.
Connect the vacuum hose to the accessory that is
being used to do the vacuuming.
The collection tank cover has not been
properly positioned.
Remove the collection tank cover and position the
collection bag correctly.
The collection bag has not been positioned
correctly.
Remove the cover of the collection tank and empty the
collection bag or else change it (see the paragraph
“ REMOVING & CLEANING THE REUSABLE /
DISPOSABLE DUST BAG ”).
The collection bag is full or was torn.
Remove the collection tank cover, remove the
collection bag and position the fabric filter correctly.
The fabric filter is not correctly positioned.
Remove the collection tank cover, remove the
collection bag and clean or replace the fabric filter
(read the paragraph “ CLEANING THE POLYESTER
FABRIC FILTER ”).
The fabric filter is clogged or has torn.
Check that there is nothing obstructing the vacuum
hose, if there is, remove it.
The Machine
Is Not
Collecting Dust
The vacuum hose is blocked.
Check that there is nothing obstructing the vacuum
hose, if there is, remove it.
The vacuum chamber of the accessory in
contact with the floor is blocked.
Check that there is nothing obstructing the
vacuum chamber of the accessory being used, if
there is, remove it.
The cap of the vacuum nozzle has not been
closed properly.
Insert the cap into the vacuum nozzle correctly.
TROUBLESHOOTING
This chapter lists the most common problems linked with the use of the appliance. If you are unable to
resolve the problems with the information given here, please contact your nearest assistance center.
DISPOSAL
To dispose of the appliance, take it to a demolition center or an
authorised collection center.
Before scrapping the appliance, it is necessary to remove and
separate out the following materials, then send them to the appropriate
collection centers in accordance with applicable environmental hygiene
regulations:
l
Electric and electronic parts*
l
Plastic parts
l
Metallic parts
(*) In particular, contact your distributor when scrapping
electric and electronic parts.