manualshive.com logo in svg

American Recorder AllCast MULTI-FUNCTION MONITOR STAND, Руководство пользователя, Страница: 6 / 8

Поделиться
Скачать
American Recorder AllCast MULTI-FUNCTION MONITOR STAND Скачать руководство пользователя страница 6

6

STEP 6a 

SINGLE

 

MONITOR

- Place monitor arm onto pole and 

secure by tightening arm support bolt with Allen Wrench Key.

STEP 6a 

DUAL

 

MONITOR

- Place DUAL MONITOR ARM onto pole 

and secure by tightening arm support bolt with 6mm Allen Wrench Key.

STEP 6b -Select Monitor bolts and spacers

STEP 6e -Hang monitor(s) to the stand and secure with Thumb Bolt

STEP 6c - Attach the VESA PLATE to monitor

STEP 6e -Tighten TENSION SCREW with 3mm Allen Wrench Key so 
the monitor angle can be easily adjusted by hand, but enough 
pressure to stay in place.

STEP 6

Monitor Arm Assembly

IMPORTANT NOTE:

 The ALLCAST Multi-Functional Monitor Stand can be used with either a single 

or

 dual 

flat screen monitors.  This stand will not support three monitors.

MONITOR ARM

DUAL MONITOR ARM

TENSION 
ADJUSTMENT
SCREW

THUMB BOLT

or

Most computer monitors 27” or 
under use a 4mm bolt for attaching 
the VESA Plate.   

Bolt length: Verify adequate threat engagement with bolts or bolts/spacers combination.  We
recommend thread engagement of at least 5 full turns. Too short and bolts will not safely hold
the monitor.  Using bolts too long may damage the monitor.

ARM
SUPPORT 
BOLT

ARM
SUPPORT 
BOLT

FLAT BACK 
MONITOR 
PANELS

CURVED BACK 
MONITOR 
PANELS

or

M4 Bolt

Washer

M4 Bolt

Washer

Spacer

M4 Bolt

Washer

Spacer

0

5

25

75

95

100

ALLCAST MULTI STAND OWNERS MANUAL ver2.0

Saturday, February 20, 2021 3:05:55 PM

Содержание AllCast MULTI-FUNCTION MONITOR STAND









Отзывы:

Нет отзывов