Slide-In Cook Tops
Installation Manual
13592 Desmond St., Pacoima, CA 91331 818.897.0808 tel 888.753.9898 toll free www.americanrange.com
14
GENERAL INSTRUCTIONS
INSTALLATION INSTRUCTIONS
• Installation of this appliance should be performed by qualified, licensed persons.
• Products are anchored to the pallet using metal straps that are screwed to the bottom of the product and the pallet.
• To remove the packaging, first remove the staples located at the bottom perimeter of the corrugated cover.
• Remove the corrugated cover by lifting it off the product and remove the inner packing.
• Detach the product from the metal anchor strip by removing the attachment screw.
• Confirm available access to adequate power and gas. See Specifications and Electrical Requirements table.
• Fill out page 1
of this manual with requested data. Model number and serial number can be found on the plate located
underneath the control panel on the front of the appliance.
• Do not remove protective packaging until you are ready to perform the installation.
• Do not remove the protective wrapping from the product control panel until the product is installed.
• Use proper equipment to move products.
• Any openings in the wall and in the floor behind or under the appliance must be sealed.
CAUTION
!
Do not use an extension cord with this appliance. Such use may result in fire,
electrical shock or other personal injury.
The appliance is heavy. Use extreme care when handling.
WARNING
!
