23
4580 N. Walnut Rd., N. Las Vegas, NV 89081 | 13592 Desmond St., Pacoima, CA 91331 | tel: 818.897.0808 | 888.753.9898 | www.AmericanRangeHome.com
INSTALLATION
ANTI-TIP DEVICE INSTALLATION
STEP 3
ANTI-TIP BRACKET INSTALLATION
1. For wooden walls, wall studs and floors, drill 18" pilot holes. Use the hardware
provided with this kit.
ANTI-TIP BRACKET
WALL STUD
FLOOR
BA
C
K
W
AL
L
STEP 4
2. For concrete wall and floors, the drilled pilot hole size may depend on the
plastic anchor or concrete anchors used. Plastic and concrete anchors are
available in local hardware stores. Follow instructions in using this hardware.
RANGE HEIGHT TO CABINET ADJUSTMENTS
1. The appliance is designed for a standard 36" cabinet height. The range is equipped
with adjustable legs and/or adjustable legs and casters, to match the actual cabinet
height.
2. The appliance is also equipped with an adjustable anti-tip bracket located at the
bottom rear left. Removed the screws and save them and replace after adjustment
of the anti-tip bracket.
3. The anti-tip bracket may be adjusted with increments of 12" inches (figure 4). If
adjustments of 14" is necessary, flip the bracket and use the holes for re-alignment
(figure 4a). Replace the screws.
REMOVE
SCREWS
AND ADJUST
BRACKET
REMOVE
SCREWS;
FLIP AND
ADJUST
BRACKET
Fig. 4
Fig. 4a
