13
4580 N. Walnut Rd., N. Las Vegas, NV 89081 | 13592 Desmond St., Pacoima, CA 91331 | tel: 818.897.0808 | 888.753.9898 | www.AmericanRangeHome.com
INSTALLATION
A. 1/2" NPT Gas supply pipe, threaded both ends.
B. 1/2" NPT 90° Elbow.
C. Adapter (must have 1/2" male pipe thread).
D. Flexible connector.
E. Manual gas shutoff valve.
F. 3/4" or 1/2" gas supply.
G. Use pipe-joint compound.
To avoid risk of electrical shock, personal injury or death; leak testing of the appliance must be conducted
according to the manufacturer’s instructions. Before placing appliance in operation, always check for gas
leaks with soapy water solution.
DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS
The electrical service in the building must be equipped with a properly grounded four-prong receptacle,
in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/
NFPA 70, or in Canada – to Canadian electrical codes, CSA C22.2.
DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM PLUG
!
WARNING
!
DANGER
G Use pipe-joint compound.
F 3/4" or 1/2"gas supply.
E Manual gas shutoff valve.
B 1/2"NPT 90° Elbow
C Adapter (must have 1/2" male pipe thread).
D Flexible connector
G
A
C
D
C
E
F
G
B
A 1/2"NPT Gas supply pipe, threaded both ends
All items below shall be supplied by the customer:
TYPICAL GAS CONNECTIONS
GAS CONNECTIONS (continued)
Connect to gas supply.
IMPORTANT: Before placing appliance into operation, always check for gas leaks.
This must be performed by your dealer, a qualified licensed plumber, or the gas company.
G Use pipe-joint compound.
F 3/4” or 1/2”gas supply.
E Manual gas shutoff valve
All items below shall be supplied by the customer:
CONNECT TO GAS SUPPLY.
IMPORTANT:
Before placing appliance into operation, always check for gas leaks.
This must be performed by your dealer, a qualified licensed plumber, or the gas company.
