American Panel Walk-in Monitoring System 200, Руководство пользователя

Страница: 26 / 38

PC COMMUNICATION (OPTIONAL)
26
11. PC Connection Kit And Software (Optional)
The PC connection interface was designed to allow users to monitor and control the WIMS 200 from the
convenience of an office computer. WIMS 200 can be operated and programmed from a remote PC via PC
communication software (Windows 95, 98, 2000, NT, and XP).
11.1. Package Content
Serial to USB adapter
USB cable Software CD
11.2. Connect WIMS 200 To Your PC
When connecting WIMS 200 to your PC follow the instructions below and refer to the diagram on Chapter 12.2.
Run a two wire cable (maximum 4000 feet) from the terminals labeled A and B at the junction box to your
computer. The junction box is located inside the walk-in above the door frame, if the cooler is equipped with
stub-outs the connection will be done on top of the walk-in cooler/freezer.
Make a note of which wire goes to which terminal. The wires will have to be connected the same way at the
Serial to USB adapter.
After completing the wiring, install the communication software, CPX-200, and the provided drivers for the
USB adapter from the provided CD.