Using the MegaRAC Hardware Health Function
11
HHF Parameters,
Continued
Thresholds
The threshold section is used to enter the warning and
critical limits used to monitor the health function. For
example, you can set the high and low temperatures for the
warning limits. If the temperature reaches a specified
warning limit, the administrator is notified. You can also
set critical limits for the temperature. Critical limits are
higher and lower than the warning limits. An example is
shown below:
Add/Edit Access Script
The Add/Edit button on the Health Function
Porting Form screen is used to access the Access Script
Form screen. On this screen you can enter the following:
•
Primary Access
•
Operations in order
•
Final Access
•
Access Method
•
SlaveID (hex)
•
User Data (hex)
•
Advanced Information
•
Script Table
Cont'd
