American Megatrends Atlantis Pentium II PCI ISA Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 75

background image

Chapter 2 AMIBIOS Setup

41

Section 2

Advanced Setup

Choose Advanced Setup from the AMIBIOS Setup main menu. Advanced
Setup options are displayed by highlighting the option using the arrow keys.
All Advanced Setup options are described in this section.

Typematic Rate This option sets the rate at which characters on the screen repeat when a key

is pressed and held down. The settings are Slow or Fast. The Optimal and
Fail-Safe default settings are Fast.

System Keyboard This option does not specify if a keyboard is attached to the computer.

Rather, it specifies if error messages are displayed if a keyboard is not
attached. This option permits you to configure workstations with no
keyboards. The settings are Absent or Present. The Optimal and Fail-Safe
default settings are Present.

Primary Display This option configures the type of monitor attached to the computer. The

settings are Mono, CGA40x25, CGA80x25, VGA/EGA, or Absent. The
Optimal and Fail-Safe default settings are VGA/EGA.

PS/2Mouse Support Set this option to Enabled to enable AMIBIOS support for a PS/2-type

mouse.. The settings are Enabled or Disabled. The Optimal and Fail-Safe
default settings are Enabled.

Display BIOS POST Messages Set this option to Yes to display the standard AMIBIOS

messages during the BIO Power On Selt Test (POST) phase. The settings are:

Setting

Description

Yes

The standard messages that AMIBIOS displays before
booting the system will appear on the system monitor.

No

The standard AMIBIOS POST messages will not appear on
the system monitor.

Cont’d

«
...
43
44
45
46
47
...
»

Содержание Atlantis Pentium II PCI ISA












































































Отзывы:

Нет отзывов

Похожие инструкции для Atlantis Pentium II PCI ISA

Бренд: Actel Страницы: 2

MYC-C8MMQ6-8E2D-160-I

Бренд: MYiR Страницы: 50

Cyclone IV GX FPGA

Бренд: Altera Страницы: 60

Бренд: JETWAY Страницы: 44

Бренд: Aaeon Страницы: 44

Бренд: Intel Страницы: 78

X58 PLATINUM SLI - Motherboard - ATX

Бренд: MSI Страницы: 74

Бренд: Gigabyte Страницы: 18

Бренд: BOSER Technology Страницы: 38

Бренд: Abit Страницы: 110

MPG B550I GAMING EDGE WIFI

Бренд: MSI Страницы: 69

Бренд: Texas Instruments Страницы: 34

Бренд: Gigabyte Страницы: 88

Бренд: TYAN Страницы: 74

Бренд: Texas Instruments Страницы: 13

EVAL-AD4696FMCZ

Бренд: Analog Devices Страницы: 28

Бренд: Analog Devices Страницы: 12

Бренд: Analog Devices Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды