manualshive.com logo in svg

American Megatrends 87 Series, Руководство пользователя, Страница: 65 / 121

Поделиться
Скачать
American Megatrends 87 Series Скачать руководство пользователя страница 65

Enterprise-IV EISA VLB Motherboard User's Guide

67

Section 3

ADVANCED CMOS SETUP

ADVANCED CMOS SETUP is shown below. Use 

↑

 and 

↓

 to scroll through the options.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•          AMIBIOS SETUP PROGRAM - ADVANCED CMOS SETUP                         •
•     (C) 1993 American Megatrends, Inc. All rights reserved                   •
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• Typematic Rate Programming : Enabled • System   ROM Shadow F000,64K: Shadowed•
• Typematic Rate Delay (msec): 500     • Shadow RAM Write Protection : Enabled •
• Typematic Rate (Chars/Sec) : 30      • BootSector Virus Protection : Disabled•
• Mouse Support Option       : Disabled• LBD Sampling Point          : 2T      •
• Above 1 MB Memory Test     : Enabled • Cache Write Back            : Enabled •
• Memory Test Tick Sound     : Enabled • Non-Cacheable Area 1        : DRAM    •
• Memory Parity Error Check  : Enabled • Non-Cacheable Area 1 Size   : 0 KB    •
• System Boot Up Num Lock    : On      • Non-Cacheable Area 1 Start  : Disabled•
• Floppy Drive Seek At Boot  : Disabled• I/O Recovery Select         : 3 BCLKs •
• System Boot Up Sequence    : C:,A:   • Hidden Refresh              : Enabled •
• System Boot Up CPU Speed   : High    •                                       •
• External Cache Memory      : Enabled •                                       •
• Internal Cache Memory      : Enabled •                                       •
• Password Checking Option   : Setup   •                                       •
• Video   ROM Shadow C000,32K: Shadowed•                                       •
• Adaptor ROM Shadow C800,32K: Disabled•                                       •
• Adaptor ROM Shadow D000,64K: Disabled•                                       •
• Adaptor ROM Shadow E000,64K: Disabled•                                       •
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••ESC:Exit 

↑→↓←

:Sel (Ctrl)Pu/Pd:Modify F1:Help F2/F3:Color   ••••••••

•••••••••••••F5:Old Values F6:BIOS Setup Defaults F7:Power-On Defaults  ••••••••

Help Screens

All AMIBIOS Setup options have help screens accessed by pressing <F1> when the option is highlighted.

Warning Message

A warning message is displayed when ADVANCED CMOS SETUP is selected. Press any key to continue.

Содержание 87 Series


























































































































Отзывы:

Нет отзывов