Chapter 5 AMIBIOS Setup
62
AUTO DETECT HARD DISK
When enabled, this option displays the parameters for IDE hard disk drives. You can accept or reject the
parameters. If accepted, these parameters are displayed in STANDARD CMOS SETUP. The parameters
are displayed as follows:
Write to CMOS and Exit
The selected options and new password (if any) are stored in CMOS RAM. A checksum is calculated and
written to CMOS RAM. Control is passed to AMIBIOS.
Write to CMOS and Exit (Y/N)?
appears when you press <Enter> when this option is highlighted. Type
N
and press <Enter> to return to the
Main Menu. Type
Y
and press <Enter> to save the system parameters and continue the boot process.
Do Not Write to CMOS RAM and Exit
This option passes control to AMIBIOS. After this option is highlighted and you press <Enter>, type
N
and
press <Enter> to return to the Main Menu. Type
Y
and press <Enter> to continue to boot without saving.
Содержание 87 Series
