American-Lincoln Alto SR7770HC, Руководство оператора, инструкция и список запасных частей

Страница: 24 / 160

1-22 American-Lincoln
®
SR7770 HCOperator’s Manual
OPERATING INSTRUCTIONS
TO DRAIN TANK1
Draining the solution tank is accomplished by a 4-foot (92 cm.) long drain hose located inside the left hand door.
TO CLEAN TANK1 (RECYCLING OPERATION) (ESP System)
The four clean out doors located as shown simplifies the cleaning of the solution tank. Flush all deposits from the
tank, also flush all probes and the solution line strainer to remove any deposits, remove strainer if necessary.
When the cleaning operation is completed, turn off the valve and replace the hose. Close and secure clean out
doors.
TO DRAIN TANKS 2 and 3
Two 4-foot long drain hose for the tanks are located under the frame channel. To drain the tank lower the hose,
remove the drain plug. When the draining operation is completed, flush and clean the tank as outlined below.
TO CLEAN TANKS 2 and 3
The large access cover on the recovery tanks simplify the cleaning process. Once the recovery tank lid is opened,
tip out the tank. With tanks in the tipped out position (figure 20), flush all sand, sludge, debris, etc. out of the tank
with a water hose, then replace the tank and flush the manifold, ball float screen and level switch to remove any
deposits.
Once the tank2 lid is opened, fluch all sand, sludge, debris, etc. out of the tank, though the drain with a water
hoseflushing the level switches and intake screen (ESP only) to remov any deposits.
CLEAN OUT
DOOR
CLEAN OUT
DOOR
CLEAN OUT
DOOR
CLEAN OUT
DOOR