American-Lincoln Technology
FORM NO. 56041667 - 11
7765 / 7760
OPERATIONS OF CONTROLS AND GAUGES
P-4865
FIGURE
5
HOURMETER
OIL PRESSURE
FUEL GAUGE
VOLTMETER
WATER TEMPERATURE
WATER
TEMP
100
170
°F
195
220
280
77 91 104
138
°C
0
1/4
1/2
FUEL
BATTERY
10
12
14
16
-
+
HOURS
0
0
0
0 1
1/10
PSI
0
20
40
60
80
278
553
kPa
OIL
PRESS
WATER TEMPERATURE GAUGE
The Water Temperature Gauge is located on the console panel above the steering wheel in the gauge cluster. The gauge is mechanical
and activated by a sender in the engine. It displays the engine coolant temperature in Fahrenheit.
HOUR METER
The Hour Meter is located on the console panel above the steering wheel in the gauge cluster. This meter is activated when the engine begins
running. The meter indicates actual “run” time of the machine. The meter can used to determine machine maintenance intervals.
FUEL GAUGE
The Fuel Gauge is located on the console panel above the steering wheel in the gauge cluster. This gauge indicates the level of fuel
contained in the fuel tank.
OIL PRESSURE GAUGE
The Oil Pressure Gauge is located on the console panel above the steering wheel in the gauge cluster. The gauge is mechanical and
activated by a sender in the engine. It displays the engine oil pressure in PSI.
VOLT METER
The Volt Meter is located on the console panel above the steering wheel in the gauge cluster. The gauge indicates the charge level of
the battery.
SCRUB BRUSHES SWITCH
The Brushes Switch is located on the console to the left of the steering wheel in the “SCRUBBING” section. This switch in the position
marked “LOWER” will lower the scrub brush deck and activate the three scrub brushes. The Brush Rotation Switch and the Brush Pressure
Switch can not be activated unless this switch is in the “LOWER” position. This switch in the “RAISE” position will stop the brushes from
rotating and raise the scrub brush deck.