American Innovations MicroMax GPS360, Руководство пользователя

Страница: 61 / 68

A
Interrupters User Guide 56
Appendix A: Factory Defaults Settings
The following table identifies factory defaults settings for the MicroMax GPS300, GPS350, and
GPS360 interrupters.
To reset the unit's settings using the interrupter's keypad, refer to Resetting to Factory Defaults with
Keypad on page 38 . To reset the unit's settings using Bullhorn Tools, refer to Resetting to Factory
Defaults with Bullhorn Tools on page 53 .
Setting Value
Interruption
9 programs, Continuous, on/off times in
seconds.
Program 1: 3.0 / 1.0
Program 2: 0.8 / 0.2
Program 3: 3.0 / 1.0
Program 4: 4.0 / 1.0
Program 5: 12.0 / 3.0
Program 6: 15.0 / 5.0
Program 7: 0.7 / 0.3
Program 8: 0.8 / 0.2
Program 9: 9.0 / 3.0
Interference
On/off/delay times
in seconds.
On: 13.0s
Off: 5.0s
Delay: 2.0s
Cycle time: 88s
Unit #01/10
Start Time Immediate
Stop Time Never
Output Parameters Switch: Normally Closed
Interruption Cycle: On/Off
UTC Offset UTC -06
Zero Crossing Disabled
Table A-1. MicroMax Interrupters Factory Defaults Settings