American Innovations MicroMax GPS360, Руководство пользователя

Страница: 26 / 68

4
Interrupters User Guide 21
Chapter 4: GPS360 Installation
The GPS360 interrupter consumes approximately 120 mA. The built-in solid state relay current
consumption is additional 100 V / 80 A max with > 4 s cycle or 100 V / 60 A max with 1 s-4 s cycle.
The relay is
normally closed .
The GPS360 includes a built-in battery that is used to power the unit if an external power source is
unavailable.
The interrupters are set to use Normally Closed relays by default. If you plan to use a Normally Open
relay, configure the interrupter prior to installing it.
The GPS360 installation process includes the following steps:
l
Installing the GPS360 Interrupter on page 21
l
Setting Display Contrast on page 27
l
Viewing GPS Info on page 28
l
Running a Test Program on page 29
Installing the GPS360 Interrupter
When completing the following procedure, refer to Technical Specifications on page 57 for input and
output voltage specifications.
WARNING:
Make sure to follow all precautions when working with the interrupter and high
voltage circuits.
WARNING:
Do not connect the GPS360 to primary mains power.
Metal relay casing on the GPS360 will get hot. Allow 5 - 10 minutes after interruption stops before
handling the unit.
The installation process includes the following steps. Refer to the individual sections for each step
for the complete instructions.