American Industrial Systems 10.4" DNVMR10ID3S-M2-5RT, Руководство пользователя

Страница: 6 / 44

American Industrial Systems – Marine Rugged Display Computer User Guide Page 6
2.0 Important Safety Instructions
This chapter also includes information on approval and interference inhibition of your unit. Please abide
by the warnings and instructions on the unit and in the manual. Please read these instructions carefully
before using the product and save it for later reference.

Follow all warnings and instructions marked on the product.

Unplug this product from the wall outlet before cleaning. Clean the product with a damp soft
cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage to the screen.

Do not use this product near water.

Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.

This product should be operated from the type of power indicated on the marking label. If you are
not sure of the type of power available, consult your dealer or local power company.

This product is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.
(For AC version only) Do not defeat the purpose of the grounding-type plug.

Do not allow anything to rest on the power cord.

Do not locate this product where persons will walk on the cord.

Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.

Never spill liquid of any kind on the product.

Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage points or other risks and will void the warranty. Refer all servicing to qualified
service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:

When the power cord or plug is damaged or frayed. If liquid has been spilled into the
product.

If the product has been exposed to rain or water.

If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions since improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.

If the product has been dropped or the cabinet has been damaged.

If the product exhibits a distinct change in performance, indicating a need for service.
The Marine Rugged Display Computer, Display system was built and tested by American Industrial
Systems, Inc. in accordance to prescribed safety conditions, and in a safe condition.
In order to retain this condition and maintain safe operation, the users must abide by the instructions and
warnings

The electrical installations in the room must not violate the requirements of the local (country-specific)
regulations.

The unit must be used in accordance with these instructions.

Pay close attention that there are no cables, especially power cables, in areas where ambulatory traffic
may interfere.

Only use the power cord supplied with the package. Don't use injured or damaged power cords.