Step 8:
Locate the #2 and #3 rails (side rails) and the corresponding long side blinds. Making sure the
rail blind is centered on the rail, and the center pocket opening seam is tight, and the blinds are flush at
each end; photo below, secure to blocks using the provided 1-3/8” screws. Be absolutely sure to use
only the enclosed blind screws when securing the blinds to each rail; incorrect screw length will cause
permanent damage to all blinds.
The above photos show an example of the alignment of the rail to the rail blind.
Step 9: Now thread the threaded rods into all rail inserts being sure to hand tighten before proceeding
to the next step
Threaded
Rod
