Assembly Instructions
AQUAMATE™ WATERING MACHINES COME COMPLETE WITH THE FOLLOWING PARTS
•
Tank & Frame Assembly
•
Tray & Lid installed (Models # 4, 5,and 6, installation required)
•
Two Wand Tubes with Bubbler Heads
•
Washable Utility Bag
•
Service Kit Bag containing:
- Wand Valve, Spray Head, Mist Head, Threaded Faucet Adapter
- Hose Hook, Wand Tube Hook
- Service Parts - Hose Washers, Clamps, touch-up paint
•
Any accessories ordered
Step 1
Model #1, 2, 3
Model #4, 5, 6
HANDLE ASSEMBLY & ADJUSTMENT for
MODELS #1, 2, 3
TRAY RACK ASSEMBLY for
• Loosen black wing screws.
MODELS #4, 5, 6
• Rotate handles to "in use" position.
• Tray and lid are in inner box.
• Slide handle sleeve over to cover both ends of handle.
• Unscrew bolt from top of tank.
• Rotate-sleeve until buttons pop through holes.
• Place tray rack on tank.
• Adjust handles to desired height and tighten black wing screws.
• Screw bolt through hole in support
• Handles can be returned to original position for storage
bar and tighten with a wrench.
purposes.
WARNING: Never screw tray rack bolt directly into tank nut without tray rack to serve as spacer.
Over tightening tray rack bolt into tank nut will result in perforation of tank shell voiding warranty.
Step 2
UTILITY BAG ASSEMBLY
TOOL PLACEMENT
• Wrap straps over handle.
• Place the wide flat hose hook over the
• SNAP!!
edge of the tray rack with a sideways, twist-
• Pockets (facing away from the
ing motion. Coil your hose onto this hook.
tank) are for maintenance tools.
•Place the thin tube wand valve hook over
•Made of polyester with a
the tank handle. Hang your wand valve
polyurethane coating inside.
here.
• Utility bag can be washed in
•Wand tubes may be stored in the utility bag
warm water with mild soap.
or next to the tank frame using the provid-
Hang to dry.
ed velcro strap or clear plastic tube.
Step 3
2