Operating Instructions
Step 1 - Filling The Aquamate™ Watering Machine
• DO NOT EXCEED 40 PSI WATER PRESSURE
• USE WATER BETWEEN 50°F AND 75°F
• Screw swivel fitting onto a faucet.
(Use threaded faucet adapter if garden hose thread (G.H.T.) is not available.)
• Open the faucet and check to ensure fitting is secure.
• Open ball valve handle to fill AQUAMATE™.
Filling Times (in minutes)
Model #1
Model #2
Model #3
Model #4
Model #5
Model #6
2 - 3
2 - 3
4 - 5
6 - 7
9 - 10
12 - 14
• WATER FLOW AUTOMATICALLY STOPS WHEN TANK IS FULL .
• When full, close faucet and ball valve handle; unscrew swivel fitting.
Step 2 - Attaching the Wand Valve and Wand Tubes
• Screw wand valve threads into swivel fitting of ball valve.
• Line up wand tube plug and wand valve socket - push together.
• To disconnect wand tube, pull socket ring towards wand valve body and remove wand tube.
Step 3 - Watering
• Open ball valve
• Depress trigger on wand valve
• Volume of water can be controlled three ways:
Closing or opening the ball valve
The trigger on the wand valve
Changing the nozzle on the end of the wand tubes.
• To change the nozzles on the wand tubes, unscrew existing nozzle and screw on preferred nozzle.
• Tighten nozzles by hand only.
3
