Rev 10/29/13
3
Introduction
The
smartJack
door controller is designed for a quick and easy setup. The Program
Logic Controller is programmed and ready to go except for a few entries to finalize the
functions of the controller.
The
smartJack
door controller is a intelegent device that
requires some initial parameters to be entered by the installation
technician. The controller does come with default settings that
can be used as guidelines but this controller is made for just
about any size door so each installation is different.
The basic operation of the door is to start from a closed position,
once a open command is given the door ramps up to full speed,
decelerated to a slow speed then comes to a stop in the open
position, this is a smooth motion. Once a close command it
given, the door ramps up to full speed then decelerates to a slow speed and comes to
a stop once the Home limit is reached (I7.)
This manual also explains the functions of all inputs and outputs on the PLC, types of
contacts used, specific actions and jumpers that must be removed for additional
devices etc.
It is suggested that the entire manual be read and understood prior to initiating the
setup. There are some precautions and important notes that need to be followed as
directed. If this procedure is adhered to, the set up should take less than thirty
minutes.
The first time the electrical power is supplied to the
smartJack
LS controller the Main Screen will be displayed.
M
*
CK
