![american flame AF3003TX Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/american-flame/af3003tx/af3003tx_operation-instructions-manual_2924474002.webp)
INS_Remote Control - Gray
Page 2
REMOTE CONTROL OPERATION
B. REMOTE CONTROL INFORMATION
ELECTRICAL WARNING
Electrical wiring must be installed by a licensed electrician.
•
Do NOT wire 110V to wall switch.
•
Uninterrupted or continuous power is required at all times in IPI systems EXCEPT when using battery back-up.
•
Incorrect wiring will override IPI safety lockout and may cause an explosion.
•
Disconnect 110V before servicing
A double receptacle box cover and (3) wire nuts are supplied in fi replace components packet to be used when hardwiring to electrical box
located under fi rebox on right side of fi replace.
NOTE: THIS SYSTEM GOES THROUGH A CALIBRATION MODE WHEN SWITCHING FROM ‘ON’ TO ‘THERMO’ TO ‘OFF’ MODES,
CREATING A HUMMING SOUND WHICH IS A NORMAL PART OF OPERATION.
C. CONTINUOUS PILOT - FOR VERY COLD CONDITIONS
The IPI gas control system has the option of a continuous (standing) pilot feature. This allows you to change from a spark-to-pilot system to a standing
pilot system during cold weather conditions. By having the pilot on continuously, the fi rebox will remain warm and a draft is established in the vent,
allowing the main burner to turn on with less air-fl ow disruption.
When continuous pilot mode is activated, the pilot will spark and light. When fi replace is turned OFF, the pilot will remain lit when main burner has
been turned OFF.
This pilot feature can be activated or de-activated by the hand held remote control transmitter or the switch on the module. Instructions on following
page.
D. OPERATION USING BATTERY POWER
This fi replace has an optional battery operation if electrical power is lost. Position battery pack with four “AA” size batteries installed between valve and
front of fi replace. This is the coolest location under fi rebox, ensuring longer battery life.
NOTE: When operating fi replace in this capacity, the only function available is fl ame ON/OFF.
We recommend not installing the 4 batteries until needed during a power outage. This will ensure the batteries aren't neglected and will work when
needed.
f i r e - p a r t s . c o m