11
Converting To A Different Gas Type
To convert propane to natural gas or from natural to propane gas, carefully follow the steps below:
SHUT OFF THE GAS SUPPLY TO THE UNIT AND ANY NEARBY ELECTRICAL SOURCES OR
APPLIANCES.
1.
If present, remove all decorative media from the unit.
2. Remove the screws attaching the burner pan to your enclosure
holder from the burner pipe (see Fig. 2).
Note: If you are converting to and using natural gas you MUST install the air shutter over burner pipe to cover the air holes
(see Fig. 5). For propane (L.P.) gas, remove the air shutter.
5. Remove the propane hose and regulator from the inlet side of the on/off gas valve (Figure 3) (do not discard). Install 3/8”
connecter hose, (not included) to inlet side (Figure 6)
6. Note: Prior to completing the installation, attach supplied sticker (with Natural Gas information) to the rating plate showing
that the conversion was completed.
7. Install your burner system and connect to your gas supply, check for leaks per the INSTALLATION section. When no leaks
are detected, complete the installation process.
Figure 1
when changing to different gas type.
Figure 2
