manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII, Руководство оператора, Страница: 38 / 114

Поделиться
Скачать
American Dynamics SpeedDome Ultra VII Скачать руководство пользователя страница 38

4-4 

SpeedDome Ultra VII Operator's Manual

 

Setting Alarm Actions 

 

 

 

I M P O R T A N T  

Some controllers allow the alarm actions for domes to be specified at the controller. See the 
appendixes for information about which controllers support this function. Do not use both the 
dome configuration utility and the controller to assign the alarm actions for the same input.   

Use only the dome configuration utility or the controller to the assign the alarm actions.

 

 

 

 

1. Select 

Alarms/Areas/Home/Presets/PZ

 from the 

Dome Configuration Menu

. 

2. Select 

Set Alarm Actions

.  

The 

Set Alarm Action

 screen appears.  

3.  Move the highlight bar to the appropriate alarm input. Change the setting. 

• 

Select 

Preset

 to use a preset as the alarm action. Continue with step 4. 

• 

Select 

Pattern

 to use a pattern as the alarm action. Continue with step 4. 

• 

Select 

No Action

 if you do not want to set an alarm action. Continue with step 6. 

The default setting is No Action. 

4.  Move the highlight bar to the 

Action Number

 field and select the action number. 

• 

For 

preset

, select the number from 

1 through 96

. Continue with step 5. 

 

 

 

Note:

 The protocol (or controller) used may support fewer presets. Refer to 

the appropriate Appendix for additional information. 

 

 

 

• 

For 

pattern

, select the number from 

1 through 3

 for the pattern you want to assign. 

Continue with step 5.  
If the selected pattern is not programmed, the dome runs the Apple Peel pattern. 

5.  If you need to make additional changes to the alarm actions for this dome, repeat steps 3 

and 4. When finished, continue with step 6. 

6.  Move the highlight bar to 

Send Inputs to Host?

  

• 

Choose 

Yes

 to forward changes in input states to the host controller.   

• 

Choose 

No

 to prevent changes in the input states from being forwarded to the host 

controller.  

The default setting is Yes. 

7. Select 

Exit

 to return to the 

Alarm/Areas/Home/PZ

 screen. 

8. When 

the 

Alarm/Areas/Home/PZ

 screen appears, select 

Exit

. The 

Dome 

Configuration Menu

 appears. Continue with 

What To Do Next

 on page 4-20.  

Содержание SpeedDome Ultra VII



















































































































Отзывы:

Нет отзывов