manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII, Руководство оператора, Страница: 109 / 114

Поделиться
Скачать
American Dynamics SpeedDome Ultra VII Скачать руководство пользователя страница 109

 

SpeedDome Ultra VII Glossary 

Glossary-3 

Open Shutter 

Setting used to improve the quality of video obtained in extreme low-light 
situations. When the Open Shutter setting is enabled, low-light information is 
collected over multiple fields based on the 

Shutter Limit

 setting. As a result, 

video may appear blurred or choppy in extreme low-light situations. This setting 
does not effect camera operation in normal lighting situations. See also 

Automatic Gain Control (AGC)

. 

Password 
Protection 

Prevents unauthorized users from starting the Configuration Utility. The 
password may be from 1 to 8 characters long.   

Pattern 

A series of pan, tilt, zoom and focus movements from a single programmable 
dome. Up to 3 patterns may be programmed for the dome. 

Peel 

Button found on some controllers that initiates the Apple Peel pattern.  
See Apple Peel Pattern. 

Preset 

Programmed video scene, based on a specific pan, tilt, zoom, and focus settings.  
Up to 96 presets may be programmed for the dome. For domes running in a 
Manchester network, only 64 presets may be programmed. See also “Virtual 
Views”. 

Privacy Zones 

Masked areas of the camera dome's viewing area. These masks prevent operators 
of the surveillance system from viewing these designated zones. Each Privacy 
Zone has four sides, and the zones may overlap to form irregular shapes. The 
Privacy Zones move in relation to the dome pan/tilt position. In addition, the 
apparent size of the Privacy Zone adjusts automatically as the lens zooms in or 
out. Up to eight Privacy Zones may be established for a camera dome. 

Shutter Limit 

Setting used to define the maximum exposure time for the Open Shutter setting. 
The values for the setting range from 1/2 to 1/60 for NTSC, and 2/3 to 1/50 for 
PAL. The default setting is 1/4 for NTSC and 1/3 for PAL. 

“Virtual Views” 

Similar to Preset. However, virtual views store the pan, tilt, zoom, focus, and iris 
settings within the controller, not the dome.  Virtual Views cannot be used for 
the Home Position or Alarm Actions. 

White balance  

Adjustments in the color hue (red and blue) gains for a camera so that true white 
appears white in the image. It is normally compensated for by the automatic gain 
control. In some lighting conditions, you may need to manually adjust the red 
and blue settings for optimal viewing. When Automatic White Balance is 
enabled, the camera measures the image and automatically adjusts the red and 
blue settings to balance white.  When Automatic White Balance is disabled, the 
camera uses the values set for the red and blue settings to balance white. 

Zoom  

To adjust the magnification of the camera lens to make an object appear closer 
(larger) or farther away (smaller). See also Zoom stop factors. 

Zoom stop 
factors 

Defines how the zoom function is partitioned. The first zoom stop setting may 
be 22X or 33X. The default first zoom stop setting is 33X. The maximum zoom 
stop setting may be 44, 66, 88, 110, 132, 154, 176, 198, 220, or 242X. The 
default maximum zoom stop setting is 88X.  

Содержание SpeedDome Ultra VII



















































































































Отзывы:

Нет отзывов