American Dynamics SpeedDome Optima, Краткое руководство пользователя

Страница: 6 / 8

RASO AND RASI SERIES SPEEDDOME OPTIMA 8000-2692-13, REV. C
QUICK REFERENCE GUIDE
6 of 8
AD2083-02B Code Converter
See Supported AD Keyboards for button names
used on specific keyboards.
Operate Commands
The controller must be in Operate mode to use
these commands.
Dome Function Keyboard Command
Call Preset 1-16 1-16 Shot
Reset Iris 66 Shot
Flip 67 Shot
Run Pattern # 1 70 Shot
Run Pattern # 2 71 Shot
Run Pattern # 3 72 Shot
Auto Repeat Pattern #1 69 Shot, then 70 Shot
Auto Repeat Pattern #1 69 Shot, then 71 Shot
Auto Repeat Pattern #1 69 Shot, then 72 Shot
In addition, the following commands are not
supported:
•
Set Auxiliary 4 OFF (63 Shot)
•
Set Auxiliary 4 ON (64 Shot)
Program Commands
The controller must be in Program mode to use
these commands.
Dome Function Keyboard Command
Reset Dome 65 Shot
Program Preset 1-16 Shot
Define Pattern #1 70 Shot
Define Pattern #2 71 Shot
Define Pattern #3 72 Shot
End Pattern Definition 68 Shot
Save New Pattern 69 Shot
Clear Pattern #1
62 Shot
Clear Pattern #2 63 Shot
Clear Pattern #3 64 Shot
Enter V-phase Adjustment
67 Shot , followed by iris
open/close
Exit V-phase Adjustment 67 Shot
MegaPower 48 Matrix Switcher/
Controller System
See Supported AD Keyboards for button names
used on specific keyboards.
Dome Function Keyboard Command
Define Pattern # 1 121 - F2
Define Pattern # 2 122 - F2
Define Pattern # 3
123 - F2
End Pattern Definition 120 - F2
Save New Pattern 130 - F2
Go to Pattern # 1 31 - F1
Go to Pattern # 2
32 - F1
Go to Pattern # 3 33 - F1
Run Pattern # 1 21 - F1
Run Pattern # 2
22 - F1
Run Pattern # 3 23 - F1
Auto Repeat Pattern # 1 41 - F1
Auto Repeat Pattern # 2 42 - F1
Auto Repeat Pattern # 3
43 - F1
Clear Pattern # 1
(SpeedDome RS-422) 131 - F2
Clear Pattern # 2
(SpeedDome RS-422)
132 - F2
Clear Pattern # 3
(SpeedDome RS-422) 133 - F2
Flip (Rotate dome 180º) 19 - F1
Reset Iris 20 - F1
Return to Auto Iris / Auto
Focus 69 - F1
Reset Dome
30 - F1
Enter Vertical Phase
Adjust Mode 38 - F2
Exit Vertical Phase Adjust
Mode 39 - F2
In addition, the following commands are not
supported:
•
Set Auxiliary 4 OFF (70-F1)
•
Set Auxiliary 4 ON (71-F1)