MegaPower 48 Release 1.06 Installation Guidelines
3
Part Number 8200-0341-9900 A0
©Copyright 2003 Sencormatic Electronics Corp.
14. The
Hold
display on your monitor changes to
v1.06
, and
the upgrade is complete.
Restoring System
Parameters
To restore system parameters from flash memory:
1.
On an AD2088/AD2079 Keyboard, turn the key switch
to Program. On a MegaPower Control Center keyboard,
press the Program Mode softkey.
2.
Type
55
F2
immediately followed by
141
F2
.
3.
On an ADTTE Keyboard, make sure the keyboard is
unlocked and type the same commands. Wait
approximately one (1) minute for the system parameters
to be restored.
