MEGAPOWER 3200 RELEASE 2.0
8200-0421-19, REV. A
RELEASE NOTES
15 of 16
Fixed Defects
(from EASY CPU version 1.3 and ADMPCPU version 1.06)
Table 6. Fixed defects
Defect
Description
1520
Definitions\Satellite Sites. Warning if you attempt to input a null character.
1593
SnapShot fields in EASY CPU Options Window not updated when file read from MPU.
1596
Pseudo numbers are not displaying properly. They sometimes show physical camera numbers instead.
1769
Error occurs when attempting to access categories relating to previously deleted data.
1798
Deleting keyboards in 'ADMPCPU > Definitions > Keyboards' will not permit them to be reentered.
1850
EASY CPU Passive Hot Switch Status only updates or shows status of CPU #1 IP address.
1851
Easy CPU should be able to update configuration data of both CPUs in dual mode and TOD to all
satellite CPU.
1852
Leaving the cursor in the most recently changed field and 'saving' does not always accept new value.
1877
After launching the Configurator, the first attempt to write yields "forcibly closed" error.
1911
EASY CPU configurator cannot open configuration files saved by activity logging.
1917
A File/Write should have four check boxes for CPU #1, CPU #2, system folder, and backup.
1920
Selecting "[] Use the configured address" during Write doesn't display target IP address(es) as a
confirmation.
1921
The "Passive Hot Switch Status" display screen headings are unclear.
2006
Load test with Sen ADDL, or ADDL alone causes poor manual PTZ control.
2009
Editing Enhancements- Alarms section.
2016
ADMPCPU is transmitting more data than it has to and incorrectly sets record bits to EASY CPU.
2018
EZ-CPU Satellite Sites won’t accept Host Port values of zero, if already set to value greater than zero.
2019
Switching>Salvo>Alarm Contacts screen - Add & Remove button not working.
2020
Unhandled Exception Error appears when trying to add a monitor to Tours in the Event Timer.
2032
Cut & Paste doesn't do anything of value for Tours either within same or multiple instances.
2033
Creating Tours in S3 can cause problems when imported to EASY CPU.
2050
Unable to save program properly after edit in Partitions section.
2057
Event Timers not being deleted from ADMPCPU memory.
2072
Saving and writing configs to the ADMPCPU, write fails to become active after save.
2083
Camera Status stuck in loop when connection to ADMPCPU doesn't exist or fails.
2090
The VideoLoss processing doesn't specify the camera number of the alarmed video.
2109
Alarm messages not always being displayed on the monitor when they are being queued.
2112
Keyboard PRIORITY control-override configuration is not working.
2129
Presets >8 for Cameras >1024 are not being transmitted on the proper AD Data Line.
2134
Salvo and Tour names entered into EASY are not saved to/restored from the MPU.
2135
Camera titles increase field size when generated automatically.
2154
Copy/Paste menu function causing an anomaly where a different value is pasted than was copied.
2155
The keyboard contention message does not correctly display keyboard numbers above 99.
2157
Reducing the System > Options - Max Cameras Configuration results in unexpected data loss.
2160
ADMPCPU sending more than one email for alarms.
2168
Systems>options menu: max configurations should default to Cameras=1024, Monitors=128 &
Alarms=1024.
2172
Duplicate alarm contacts.
2185
Alarms cannot be turned off.
