SPEEDDOME ULTRA INDOOR HOUSING AND INDOOR VANDAL-RESISTANT HOUSING
8200-0184-07, REV. B
INSTALLATION GUIDE
1 of 4
SpeedDome
®
Ultra Indoor
Housing and Indoor Vandal-
Resistant Housing
Installation Guide
Models: ADSDUPIHC. ADSDUPIHS,
ADSDUPVRC, ADSDUPVRS
For Indoor Use Only!
Figure 1. SpeedDome Ultra housings
About this Guide
This guide explains how to prepare the indoor
housing for installation to a mounting structure and
assumes that the mounting structure is in place
and that data and power cables have been pulled
to the installation site.
This guide does not explain:
- Cable requirements,
- Camera installation, or
- How to install the mounting structure.
For this information, see instructions shipped with
the camera dome or mounting structure.
About the Indoor Housing
The indoor housing (Figure 1) is used to attach the
SpeedDome Ultra camera dome to an indoor
mounting structure. This housing can attach to
mounting structures shown in Table 1.
© 2005 Sensormatic Electronics Corp.
Table 1. Indoor mounting Structures
RHOPN
Pendant Mount
RHIUIBM
I-Beam Mount
RHOSW/RHOLW
Short/Long
Wall Mount
RHOWCA
Corner Mount
RHOWPA
Pole Mount
ROENDC
End Cap
If You Need Assistance…
Contact your sales representative.
Indoor Housing
Indoor Vandal-
Resistant Housing
