Quad Processors
5
STANDARD QUAD PROCESSOR REAR PANEL CONNECTORS
1 power —
Power input connector. Only use 12 VDC center-positive power supply.
2 alarm —
DB9-P connector. See
Alarm Connector Pin Assignments
for details.
3 ground —
Chassis ground point with Phillips screw connector.
4 monitor —
BNC connector. Delivers display output to a monitor terminated in 75 ohms.
5 vcr out —
BNC connector. Delivers video signal in quad format to an attached VCR.
6 vcr in —
BNC connector. Accepts video signal from an attached VCR for playback.
7 camera termination —
Set camera termination ON (75
Ω
) or OFF (HiZ)
8 cam 1-4 in —
BNC connectors. Accept video input. Auto-terminated in 75 ohms
9 cam 1-4 out —
BNC connectors. Deliver video output. Auto-terminated in 75 ohms.