Installation and Operation Guide
55
Change the Network Setting
— Port Detail.
The “Network” page has, on its upper left, the “Port Detail” icon. It allows you to specify and reserve the
ports for both the HTTP and RSTP streaming. Please follow the steps below to change the Port Detail
setting through the network as necessary.
1.
Click on the Port Detail button on the upp
er left menu to enter the “Port Detail” page.
Figure 5.20 Port Detail
2.
Enter the “HTTP port” and the “Access name for stream” for the MJPEG streams of the HTTP.
3.
Enter the “HTTP port”. The default value is 443.
4.
Enter the “RSTP port” and the “Access name for stream” for the MJPEG or JPEG streams of the
RSTP.
5.
Click on the Submit button to submit the new setting.
NOTE: If you want to use an RTSP player to access the IP camera, you have to use the following
RTSP URL command to request transmission of the streaming data.
Description of function keys:
HTTP Port
HTTP ports allow you to connect to the camera via a standard web
browser. This port can be set to a number other than the default HTTP port
80. A corresponding port must be opened on the router. For example, if the
port is changed to 8080, users must type in the web browser
'http://192.168.0.100:8080' instead of 'http://192.168.0.100'.
HTTPS Port
HTTPS Port in a camera connects it with a PC via a secure web browser.
RTSP Port
The port number that you use for RTSP streaming to mobile devices, such
as mobile phones or PDAs. You may specify the address of a particular
stream. For instance, live1.sdp can be accessed at
rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the IP address of
your camera.
