DESCRIPTION
The AD1240 Champion Series is a motorized camera pan/tilt
designed to handle loads of a maximum of 45 lbs. The rugged
design, excellent weather resistance, and high torque drive
allow the AD1240 to meet the demanding work loads of
modern CCTV control systems.
The side-load design of the AD1240 eliminates the need to
counterbalance the camera load, which is often required with
“over the top” pan/tilts. Smooth camera movement and low
power consumption are additional benefits.
In applications where presets are required, models are
available with factory installed feedback potentiometers.
FEATURES
• 45 lbs Load Capacity
• Efficient Side-Load Design
• Low Profile Configuration
• NEMA-6 Protection Rating
• Heavy Duty AC Synchronous Motors
• 24 VAC Input
• 7.3°/Sec Pan Speed, 3.6°/Sec Tilt Speed
• Powder Coat Enamel Finish
• Long Life Gear Assembly
• Models Available with Presets, and internal AutoPan or
internal Heater
MAINTENANCE
The AD1240 Series Pan/Tilt contains no user-serviceable
parts. It is recommended that the following checks be carried
out on a routine basis:
• One month after installation and every six months
thereafter, check the tightness and security of all external
fastenings.
• Every six months check all electrical cables for signs of
wear. Replace if necessary.
1
AD1240
DESCRIPTION, FEATURES, and MAINTENANCE
Figure 1 - AD1240 Champion Pan/Tilt
At no time should this Pan/Tilt be rotated or positioned
by hand. Doing so will cause irreversible damage to
the gears and transmission parts.
