PRODUCT DESCRIPTION
The 2083/06 Code Translator is used as an interface to
American Dynamics switching systems. The 2083/06 allows
retrofit or new installation of American Dynamics switchers
where non-AD remote camera control systems are in place or
desired.
The 2083/06 interfaces with Pelco Intercept Domes. A single
2083/06 can control 16 separate cameras. When operating
with the Control Code interface, multiple 2083/06 units can
control up to 128 cameras with 1650 switchers, and 32
cameras with 2150 switchers. When using the Data Line
interface, multiple 2083/06 units can control up to 512 cameras
with 1995 systems, and 1024 cameras with 2050 systems.
FEATURES
☛
UNIVERSAL MOUNT CABINET
☛
LED POWER /CODE INDICATORS
☛
DIP SWITCH SELECTION FOR CAMERA GROUP
☛
DIP SWITCH CONFIGURATION FOR BAUD RATE
☛
SCREW TERMINAL WIRE CONNECTOR
INSTALLATION
This installation should be made by qualified service personnel
and should conform to all local codes. Safeguards must be
taken to avoid unintentional operation by employees and
maintenance personnel working about the premises, by falling
objects, by customers, by building vibration, and by similar
causes.
The universal cabinet of the 2083/06 Code Translator may be
surface or rack mounted in any convenient location with
adequate ventilation.
Rack Mounting
The 2083/06 is shipped with the mounting ears installed flush
with the front panel, and can be mounted to the front of a
standard 19-inch rack. The ears of the 2083/06 Code
Translator can be removed and reinstalled such that they are
flush with the rear panel. This allows the 2083/06 to be
mounted to the rear of a rack that is equipped with mounting
channels. For proper ventilation allow at least three feet (1 m)
from the rear of the racks to any wall and one EIA rack height,
1.75 inches (4.5 cm), between units in a rack.
Wall Mounting
The unit can be mounted to the wall by reinstalling the ears
perpendicular to the side of the unit. The bottom or top covers
can face toward the wall and the front or rear panel face
upwards.
1
DESCRIPTION
Figure 1 - 2083/06 Code Translator - Rear Panel
FRONT OR REAR PANEL
RACK MOUNTED WALL MOUNTED
RACK CHANNEL
TOP OR BOTTOM COVER
WALL
FRONT OR REAR PANEL
TOP COVER
MOUNTING EARS INSTALLED FLUSH
WITH THE FRONT OR REAR PANEL
MOUNTING EARS INSTALLED
PERPENDICULAR TO THE SIDES
120V
60Hz
T
+
R
+
R
T
T
T
R
+
R
T
+
R
+
R
T
T
+
T
R
+
R
T
+
R
+
R
T
T
+
T
R
+
R
T
+
R
+
R
T
T
+
T
R
+
R
GROUP
1
2
3
4
B W S
NO NC C
DATA LINE
IN
OUT
C
O
M
INPUT OUTPUT
T
+
R
+
R
T
T
+
T
R
+
R
T
+
R
+
R
T
T
+
T
R
+
R
T
+
R
+
R
T
T
+
T
R
+
R
T
+
R
+
R
T
T
+
T
R
+
R
ABCD
ABCD
ABCD
ABCD
POWER
ALARM
CODE
S1
S2
S3
S4
Figure 2 - Mounting Options
