1
DESCRIPTION
DESCRIPTION
The 1010T Series Infrared Illuminator provides outstanding
results when used with IR sensitive black/white cameras.
The light produced by the 1010T Series is invisible to the
human eye. This feature is excellent for covert security or
where the addition of visible lighting is not possible.
The 300 watt spot-lamp is designed to project a highly
concentrated IR beam to a distance of 460 feet (140 m),
covering an area 100 ft wide x 66 ft high. Pronounced ribbing
around the two-part black enameled housing dissipates heat to
extend bulb life.
The IR filter is a lamination of vaporized-metal coated glass
and Pyrex subjected to a special hardening process.
A 10 ft (3 m) pendant line cord is standard with the
Illuminator.
FEATURES
☛
120 VAC Input
☛
300 Watt Bulb
☛
Weatherproof Housing
☛
10 ft (3 m) Heavy Duty Pendant Line Cord
GENERAL SAFETY
Observe the following safety instructions without fail:
• The 1010T generates large amounts of heat from the IR
lamp during operation. Determine that no systems
(sprinklers, thermostats, heating vents, etc.) in the
immediate installation area are triggered or damaged as a
result of this thermal radiation (heat).
• Before performing any service on or around the 1010T, shut
down the Illuminator and isolate it electrically to prevent
accidental operation. A cool-off period of approximately
one hour is required after shut down. (Even if the housing
is cool, the IR lamp may still retain enough heat to cause
injury.)
Figure 1 - 1010T Infrared Illuminator
!
CAUTION
The concentrated high power of the Infrared beam
can cause serious damage to a person's vision!
Maintain a minimum 33 foot (10 m) safety zone
between the Illuminator and any human contact.
