American Dryer Corp. AD-78 III Скачать руководство пользователя

Страница: 38 / 48

2. Each part

must be

tagged with the following information:

Model number

and

serial number

of the dryer from which part was removed.

b. Nature of failure (be specific).

c. Date of dryer installation.

d. Date of part failure.

e. Specify whether the part(s) being returned is for a replacement, a credit, or a refund.

NOTE:

If a part is marked for a credit or a refund, the invoice number covering the purchase of the

replacement part

must be

provided.

NOTE:

Warranty tags

(ADC

Part No. 450064) are available at no charge from

ADC

upon request.

3. The company returning the part(s) must clearly note the complete company name and address on the

outside of the package.

ALL

returns

must be

properly packaged to insure that they are not damaged in transit.

Damage claims

are the responsibility of the shipper.

IMPORTANT:

No replacements, credits, or refunds

will

issued for merchandise damaged in

transit.

ALL

returns

should be

shipped to the

ADC

factory in such a manner that they are insured and a proof of

delivery can be obtained by the sender.

Shipping charges are

not the responsibility of ADC

ALL returns should be prepaid to the

factory

Any

C.O.D. or COLLECT

returns will not be accepted

IMPORTANT:

No replacements, credits, or refunds

will

issued if the claim

cannot

be processed

due to insufficient information. The party filing the claim

will

notified in writing,

either by FAX or CERTIFIED MAIL - Return Receipt Requested, as to the

information necessary to process claim. If reply

is not

received by the

ADC

Warranty Department within thirty (30) days from the FAX/letter date, then no

replacements, credits, or refunds

will

issued, and the merchandise

will be

discarded.

Содержание AD-78 III

















































Результаты поиска

Содержание AD-78 III

Отзывы:

Похожие инструкции для AD-78 III

Бренды по названию

Популярные бренды

American Dryer Corp. AD-78 III, Руководство по установке

Результаты поиска

Содержание AD-78 III

Отзывы:

Похожие инструкции для AD-78 III

Бренды по названию

Популярные бренды