background image

 Vizi Spot 5R 

 

 

 

            System Menu

ADDRESS MENU -

A001 - A511

 - This is where you set the DMX address of the unit.

TEST MENU -

T-01  - T-XX 

- Tests the functions of each channel.

Note: Some channels cannot be tested.
PLAY MENU -

AUTO

 - This is a precaution mode in case the DMX signal is lost. 

There are four settings to choose from:
• “Clos” - The fixture will close the lens shutters. 
• “Hold” - This is the default setting, which in case the signal is

 lost the fixture will “hold” at the last setting. 
• “Auto” - The fixture will go into Auto mode and run a pre-pro-

grammed  show.
• “Audi” - The fixture will go into Sound Active mode.
LAMP MENU -

ON/OFF

 - Manually switches the lamp “On” or “Off”.

RESE (RESET) MENU -

ALL

 - Resets all motors.

SCAN

 - Resets the pan/tilt motors.

COLR 

(Color) - Resets the color wheel motor.

GOBO

 - Resets the gobo wheel motor.

SHTR

 (Shutter) - Resets the shutter and dimmer motors.

OTHR 

- Resets all other motors.

TIME MENU -

LIFE

 - Displays the total fixture running time.

LAMP

 - Displays the lamp running time.

CLMP

  - Clears the lamp running time.

RPAN MENU -

ON/OFF

 - Reverses the pan.

RTLT MENU -

ON/OFF

 - Reverses the tilt.

FINE MENU -

ON/OFF

 - Switch between 8bit (coarse) and 16bit (fine) pan & tilt 

movement. This also switches the DMX channel mode between 

11 channel (8 bit) and 13 channel (16 bit) DMX mode.
DEGR MENU -

540/360

 - Switch the degree of the Pan between 360 and 540.

MIC MENU -

M-01-M-70 

 - With this function you can make the internal mic 

more or less sensitive to sound.  
DISPLAY MENU -

VALU

 (DMX-512 Value) - Display the DMX-512 value of each 

channel.

D ON

 - Turns digital display off after 2 minutes.

FLIP

 - “Flips” the digital display 180º.

LOCK 

- When activated the buttons will lock automatically after 

15 seconds.
SPEC MENU -

LAAU

 - On/Off Automatically switches on lamp when power is 

applied.

RDMX

 - On/Off  With this function you are able to change the 

DMX address via external controller. See pages 29-30.

DLOF

 (Lamp Adjustment) - With this function you can adjust the 

lamp via the control board. In this mode, the device will not 

react to any control signal.

DLAY - 

With this function you can put the lamp on a delay time.

 Vizi Spot 5R 

 

 

 

            System Menu

American DJ

®

  -  www.americandj.com  - Vizi Spot 5R Instruction Manual Page 18

American DJ

®

  -  www.americandj.com  - Vizi Spot 5R Instruction Manual Page 17

Содержание Vizi Spot 5R





























Отзывы: