American DJ Vizi Spot 5R, Инструкция пользователя

Страница: 22 / 28

American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 43 American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 44
Vizi Spot 5R 11 Channel DMX Mode
Channel Value Function
1 0 - 255 PAN MOVEMENT 8bit
2 0 - 255 TILT MOVEMENT 8bit
3 COLOR WHEEL
0 - 13 OPEN
14 - 27 COLOR 1
28 - 41 COLOR 2
42 - 55 COLOR 3
56 - 69 COLOR 4
70 - 83 COLOR 5
84 - 97 COLOR 6
98 - 111 COLOR 7
112 - 127 COLOR 8
128 - 189 FORWARD RAINBOW EFFECT
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARDS RAINBOW EFFECT
SLOW - FAST
4 GOBOS
0 - 9 OPEN
10 - 19 ROTATING GOBO 1
20 - 29 ROTATING GOBO 2
30 - 39 ROTATING GOBO 3
40 - 49 ROTATING GOBO 4
50 - 59 ROTATING GOBO 5
60 - 69 ROTATING GOBO 6
70 - 79 ROTATING GOBO 7
80 - 89 ROTATING GOBO 8
90 - 104 ROTATING GOBO 1 SHAKE
105 - 119 ROTATING GOBO 2 SHAKE
120 - 134 ROTATING GOBO 3 SHAKE
135 - 149 ROTATING GOBO 4 SHAKE
150 - 164 ROTATING GOBO 5 SHAKE
165 - 179 ROTATING GOBO 6 SHAKE
180 - 194 ROTATING GOBO 7 SHAKE
Vizi Spot 5R Operation
3.
Tap the UP button until “ AUTO ” is displayed, and Press ENTER.
4. Press UP, to select “ RUN ”, or “ AUDI ”. “ RUN ” will make the unit run
through a built-in program. “ AUDI ” will make the unit sound
active.
5. Press UP, to select “ ALON ” or “ NAST ”. Which means stand alone,
or master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press MODE/ESC if you want to return to the main menu.
8. You may change the show or invert the pan and tilt functions
in the system menu by following the directions on page 25.
Master-Slave Operation (Sound Active or Auto Program):
This function will allow you to link up to 16 units together and oper-
ate without a controller. The units can run a built-in program or run in
sound actiive mode. In Master-Slave operation one unit will act as the
controlling unit and the others will react to the controlling units pro-
grams. Any unit can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. Access the main menu.
2. Tap the UP button until
“ PLAY ” is displayed, and Press ENTER.
3.
Tap the UP button to choose between “ RUN ” or “ AUDI ”. “ RUN ” will
make the units run through a built-in program. “ AUDI ” will make
the units sound active.
4. Press UP, to select “ ALON ” or “ NAST ”. Which means stand alone,
or master/slave mode.
5. Select “ NAST ” to set the unit as the Master, and press ENTER to
confirm. Now all the connected units will follow the Master.
6. Press MODE/ESC if you want to return to the main menu.
7. You may change the show or invert the pan and tilt functions
in the system menu by following the directions on page 25.