American DJ Vizi LED Spot Скачать руководство пользователя

Страница: 12 / 26

American DJ

- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 24

American DJ

- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 23

Vizi LED Spot

System Menu

5. Press the UP or DOWN button to adjust the microphone sen-
sitivity between “

M-01 - M-99

”.

6. Press ENTER to confirm when you have reached your
desired microphone sesitivity level.
7. Press MODE/ESC to return to the main menu.

DISP

MAIN MENU -

VALU

Display the DMX-512 value of each channel -

1. Access the main menu.
2. Tap the UP button until “

DISP

” is displayed, press ENTER.

3. Tap the UP button until “

VALU

” is displayed, press ENTER.

4. The display should show “

D-00

”. Press the UP button in

order to select the desired channel. If you select “

D-05

” the

display will only show the DMX value of the 5th channel
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.

Now the display will change as per the 5th channel DMX

value.

D ON

With this function “On” the display will shut off after

2 minutes -

1. Access the main menu.
2. Tap the UP button until “

DISP

” is displayed, press ENTER.

3. Tap the UP button until “

D ON

” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “

” to acti-

vate this function, or “

OFF

” to deactivate this function.

Vizi LED Spot

System Menu

FINE

MENU -

FINE

Switch between 8bit (coarse) and 16bit (fine) pan &

tilt movement. This also switches the DMX Channel mode

between 10 channel (8 bit) and 12 channel (16 bit) DMX

mode.

1. Access the main menu.
3. Tap the UP button until “

FINE

” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “

” to acti-

vate this function, or “

OFF

” to deactivate this function.

5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.

DEGR

MENU -

DEGR

With this function you can switch the Pan degree.

1. Access the main menu.
2. Tap the UP button until “

DEGR

” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “

630

” or

“

540

”.

4. Press ENTER to confirm your selection.
5. Press MODE/ESC to return to the main menu.

MIC

MENU -

MIC

The internal microphone can be made more or less

sensitive.

1. Access the main menu.
3. Tap the UP button until “

MIC

” is displayed, press ENTER.

4. The display will show “

M-01

”.

Содержание Vizi LED Spot



























Результаты поиска

Содержание Vizi LED Spot

Отзывы:

Похожие инструкции для Vizi LED Spot

Бренды по названию

Популярные бренды

American DJ Vizi LED Spot, Инструкция пользователя

Результаты поиска

Содержание Vizi LED Spot

Отзывы:

Похожие инструкции для Vizi LED Spot

Бренды по названию

Популярные бренды