Pocket Scan™
Quick Start
Pocket Scan™ Safety Precautions
©
American DJ Supply
®
- www.americandj.com - Pocket Scan™ Instruction Manual Page 4
Quick Start Stand Alone Mode
Connect all your units together via the XLR connector. You can
connect up to 16 units together in Master/Slave mode. The master
unit will run the slaves to the masters built in programs and internal
microphone. Plug in all units. When the Pocket Scan™ is first turned
on, it will run through an internal self test where it moves all motors to
their zero position. After the self test the units will react to sound, and
chase to the several built in programs.
©
American DJ Supply
®
- www.americandj.com - Pocket Scan™ Instruction Manual Page 3
• Scanner and Laser in one effect
• 4.9mW diode laser
• 15 colors plus white
• Split colors
• 13 gobos plus spot
• Separate color and gobo wheels
• High Speed Shutter with variable Speed
• 170 degree pan / 110 degree tilt
• Full Micro-stepping, with 4 stepper motors.
• Built in Microphone
• Auto switch to Stand-Alone (Master/Slave) operation
when DMX signal is disconnected
• Run up to 16 heads without controller
• DMX-512 protocol
• Full Focusing
• Fan cooled
• Uses 4 DMX Channels
• Digital DMX display
Safety Issue:
This unit may blow a fuse if the maximum allotted load
of 2 amps is reached. If the fuse needs replacement, please see the
fuse replacement guidelines on page 13.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required voltage
for your unit.
• Do not attempt to operate this unit if the power cord has been frayed
or broken. Do not attempt to remove or break off the ground prong
from the electrical cord. This prong is used to reduce the risk of elec-
trical shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product outdoors
voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
Pocket Scan™
Warranty Registration
The Pocket Scan™ carries a one yeare (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
If the unit is under warranty you must provide a copy of your proof
of purchase invoice. Please contact American DJ
®
customer support
for a R.A. number.
Pocket Scan™
Features
DANGER
VISIBLE LASER RADIATION
-AVOID DIRECT EYE EXPOSURE
LASER DIODE
WAVELENGTH : 532 nm
Max Output : <4.9mW
Class IIIa Laser Product
!
!
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.