Features:
The Multi-Data/Pak™ is universal signal converter that converts DMX
to Analog signal and MIDI to Analog signal. This allows you to use
your analog dimmer and power packs with a DMX controller or MIDI
sequencer. This unit can convert up to 72 DMX channels. This unit may
also be used as a 72 channel chaser. One scene can be stored in to memory
as an emergency back up. This unit has built in memory in case the unit’s
power is accidently disconnected.
Functions and Controls (Front):
1. Power Switch - This turns the main power on and off.
2. Fuse Holder - This holds a F315mA 250V 5x20mm that protects
the internal power supply.
3. LCD Display - This is a seven segment display that indicates
DMX signal, MIDI signal, DMX Function, Hold Function, DMX
channel, and is used to activate and make changes in the menu.
4. Up Button - This button is used to advance the selected readings in
the menu.
5. Menu Button - Use this button to activate the system menu.
6. Down Button - This button is used to descend through the menu
selections.
7. Chase Button - This button selects chase mode.
8. Store Button - Pressing this button stores a scene or recalls a stored
scene.
9. MIDI In - This connector is used to receive MIDI signal from a
MIDI controller or MIDI sequencer.
10. MIDI Thru - This connector is used to send the signal coming in
from the MIDI IN JACK (9) to another MIDI device.
11. DMX In - This 3-pin XLR jack is used to receive DMX signal from
a DMX controller.
12.DMX Out - This 3-pin XLR jack is used to send a DMX signal
to a DMX power pack or dimmer.
Functions and Controls (Rear):
13. Channels 1-24 Output - This 25 pin “D” socket connector controls
the output signal for channels 1-24.
14. Channels 25-48 Output - This 25 pin “D” socket connector controls
the output signal for channels 25-48.
15. Channels 49-72 Output - This 25 pin “D” socket connector controls
the output signal for channels 49-72.
16. Power Input Cord - Connect this cord to an AC 120V~60Hz,
electrical outlet.
Set-Up:
1. With the main power off, connect either a DMX or MIDI controller.
2. Connect your output connections to the “D” sockets (13, 14, & 15)
on the rear of the unit. Socket 13 will control output for channels
1-24. Socket 14 will control output for channels 25-48. Socket 15
will control output for channels 49-72.
3. Use the American DJ
®
Z-MDP /C to convert output connector to din
plugs.
4. After you have made all you connections, turn the main power on
and follow the operating instructions.
Operating Instructions:
Mode Select:
To access the menu you must hold down the MENU
Button (5) for at least three seconds. While in the MODE Setting, use the
UP and DOWN Buttons (4 & 6) to select DMX or MIDI mode. If
American DJ
®
Signal
MIDI
HOLD
DMX
8 8 8
MIDI IN
MIDI THRU
DMX IN
DMX OUT
DMX IN
DMX OUT
MULTI-DATA/PAK
™
MENU
POWER
FUSE
CHASE
STORE
F315mA 250v 5x20mm
OUTPUTS 1-24
1
Earth
24
OUTPUTS 25-48
25
Earth
48
OUTPUTS 49-72
49
Earth
72
POWER INPUT
AC~120V 60Hz, 0.315A
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
WARNING: THIS APPARATUS MUST BE GROUNDED
1
11
10
9
8
6
5
4
3
2
12
13
15
14
16
©
American DJ Supply
®
www-americandj.com Multi-Data/Pak™ Instruction Manual Page 3
©
American DJ Supply
®
www-americandj.com Multi-Data/Pak™ Instruction Manual Page 4
7
