Channel Value
Function
1
COLOR MACROS
0 - 10 OFF
11 - 17 BASTARD AMBER
18 - 24 MEDIUM AMBER
25 - 31 PALE AMBER GOLD
32 - 38 GALLO GOLD
39 - 45 GOLDEN AMBER
46 - 52 LIGHT RED
53 - 59 MEDIUM RED
60 - 66 MEDIUM PINK
67 - 73 BROADWAY PINK
74 - 80 FOLLIES PINK
81 - 87 LIGHT LAVENDER
88 - 94 SPECIAL LAVENDER
95 - 101 LAVENDER
102 - 108 INDIGO
109 - 115 HEMSLEY BLUE
116 - 122 TIPTON BLUE
123 - 129 LIGHT STEEL BLUE
130 - 136 LIGHT SKY BLUE
137 - 143 SKY BLUE
144 - 150 BRILLIANT BLUE
151 - 157 LIGHT GREEN BLUE
158 - 164 BRIGHT BLUE
165 - 171 PRIMARY BLUE
172 - 178 CONGO BLUE
179 - 185 PALE YELLOW GREEN
186 - 192 MOSS GREEN
193 - 199 PRIMARY GREEN
200 - 206 DOUBLE CTB
207 - 213 FULL CTB
214 - 220 HALF CTB
221 - 227 DARK BLUE
228 - 234 WHITE
235 - 241 FULL RED
242 - 248 FULL GREEN
249 - 255 FULL BLUE
Mega Go Flood Par 1 Channel Mode
ADJ Products, LLC - www.adj.com - Mega Go Flood Par User Manual Page 15
ADJ Products, LLC - www.adj.com - Mega Go Flood Par User Manual Page 16
Mega Go Flood Par RFC Operation
The ADJ RFC remote
(sold seperately) has many different functions
and allows you to control your Mega Go Flood Par from long dis-
tance. The ADJ RFC remote can control your system up to 150 ft. To
use the remote you must first activate the fixtures receiver, to activate
the receiver please see the instructions on page 10.
BLACKOUT
-
Pressing this button will blackout the fixture. Press and
hold this button for 3 seconds to return to default settings and default
running mode.
AUTO RUN
-
This button will run 1 of 16 automatic programs. You
can scroll through the 16 programs using the “+” and “-” buttons. You
can control the speed of the Auto Run by pressing the SPEED button
first and then pressing the “+” and “-” buttons. You can control the
fade speed of the Auto Run by pressing the FLASH button first and
then pressing the “+” and “-” buttons.
PROGRAM SELECTION
-
This button will activate the color macros
mode. Use the “+” or “-” to scroll through the 35 colors. Once you
have found your color, you can press the Flash Button to activate
strobing and use the “+” or “-” to adjust the Flash rate.
FLASH
-
This button will activate the flash (strobe) effect. You can
control the flash speed by pressing the “+” and “-” buttons.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the
speed of the Auto run mode or adjust the sound sensitivity while in
Sound Active mode.
SOUND ACTIVE -
This button activates sound active mode. Use the
“+” or “-” to scroll through the 15 sound active programs. Press the
SPEED button and use the “+” & “-” buttons to adjust the sound sen-
sitivity.
R G B -
Press either one of these buttons and the press the “+” or “-”
to adjust the brightness. Press the Flash Button to activate strobing
and use the “+” or “-” to adjust the Flash rate.
“+” and “-” -
Use these buttons to adjust the flash rate, speed of
the Auto Run mode, sound sensitivity, and the intensity output of the
RGB colors. These buttons are also used to scroll through the differ-
ent color macros, auto run programs, and sound active programs.
