background image

©

American DJ Supply

®

 - www.americandj.com - Dual Gem Pulse Instruction Manual Page 4

©

American DJ Supply

®

 - www.americandj.com -  Dual Gem Pulse Instruction Manual Page 3

 Dual Gem Pulse  

 

 

 

  Precautions

Safety Issue: 

This unit may blow the breaker if the maximum allotted 

load of 2 amps is reached. If the fuse needs replacement, please see 
the fuse replacement guidelines on page45.
•   Be sure the local power outlet match the required voltage of the  
   unit.
•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no 

 

   user serviceable parts inside.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture
•   This unit is intended for indoor use only, use of this product out- 
   doors voids all warranties.
•   During long periods of non-use, disconnect the unit’s main power.
•   Always mount this unit in safe and stable matter.
•   Power-Cord Protection - Power-supply cords should be routed   
   so that they are not likely to be walked on or pinched by items    
   placed upon or against them, paying particular attention to cords at 
   plugs, convenience receptacles, and the point where they exit from 
   the fixture. Do not attempt to remove or break off the ground prong  
   from the electrical cord. This prong is used to reduce the risk of  

   electrical shock and fire in case of an internal short.

•   The fixture should be serviced by qualified service personnel when:
    A. The power cord or the plug has been damaged.
    B. Objects have fallen, or liquid has been spilled into the appliance.
    C. The appliance has been exposed to rain or water.
    D. The fixture does not appear to operate normally or exhibits a  
         marked change in performance.

  Dual Gem Pulse  

 

    

 

     Operation

Introduction: 

The American DJ

®

 Dual Gem

 Pulse

 is a dual output LED 

moon-flower  effect. 

This  fixture  is  designed  for  mobile  DJ’s,  clubs, 

bands, roller rinks and any arena that requires a compact, light weight, 
easy to use unit. 

Power Supply:

 Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ

®

 

Dual Gem Pulse before attempting operation. 

General Operation:

 This fixture is designed to operate as a stand 

alone sound active unit, there is no need of a controller. It has been 
tested  and  there  is  no  assembly  necessary.  The  Dual  Gem  Pulse 
is  ready  to  be  plugged  in  out  of  the  box,  there  is  no  power  switch. 
When this fixture is plugged in, the units two LED panels will start to 
project preset designs to the sound of an audio source via an internal 
microphone. The audio sensitivity is preset at the factory for optimum 
performance and is not user adjustable. The middle panel is a pulse 
effect, that can be activated by the Strobe On/Off switch located at 
the rear of the unit. After plugging the unit if there is no output, check 
the fuse. If the fuse has not popped, please contact customer sup-
port  for  further  instructions.  This  fixture  features  a  light  weight  case 
design and an adjustable hanging bracket. 

  Dual Gem Pulse 

                 Fuse Replacement 

 Dual Gem Pulse  

            Warranty Registration

The Dual Gem Pulse carries a three year (1095 days) limited warranty. 
Please fill out the enclosed warranty card to validate your purchase. 
All  returned  service  items  whether  under  warranty  or  not,  must  be 
freight pre-paid and accompany a return authorization (R.A.) number. 
If the unit is under warranty you must provide a copy of your proof of 
purchase invoice. Please contact American DJ

®

 customer support for 

a R.A. number.

Locate  and  remove  the  unit’s  power  cord.  Once  the  cord  has  been 
removed located the fuse holder located directly underneath the power 
socket. Insert a flat-head screw driver into the top of the fuse holder 
and gently pry out the fuse holder. Remove the bad fuse and replace 
with a new one. The fuse holder has a built-in holder for a spare fuse 
be sure not to confuse the spare fuse with active fuse.

  Dual Gem Pulse  

 

    

 

      Features

•  Includes Built-In Hanging Yoke
•  Sound-Active
•  Light Weight
•  Strobe Effect Switch

Отзывы: