background image

Operating Modes:

You can use the  Pocket Scan

TM

 in three ways:

• Stand alone mode - The unit will react to sound, chasing 

    through the several built in programs.  You can also use the  

    optional  Pocket  Scan/RF  Remote  Control  to  set  blackout, 

    strobe or slow scan mode.

• Master/Slave mode - You can daisy chain up to 16 units 

    together to get a synchronized light show that will react to 

    sound chasing through several built in programs.

• DMX control mode - This function will allow you to control 

    each individual fixtures traits with a standard  DMX 512 

    controller such as the American DJ Show Designer.

TM

Stand Alone Mode:

The  Pocket  Scan

TM

  has  a  sophisticated  built-in  light  show  that 

will run to sound when there is no DMX signal present. Plug the 

fixture  in  and  it  will  chase  through  its  programs  via  sound.  You 

can  also  use  the  optional  wireless  remote  to  blackout,  strobe, 

or slow scan the units.

Master-Slave Operation:

 

This function will allow you to link up to 16 units together to run 

in  a  Master-Slave  mode.  In  Master-Slave  operation  one  unit 

will  act  as  the  controlling  unit  and  the  others  will  react  to  the 

controlling units built-in programs. Any unit can act as a Master 

or  as  a  Slave  however,  units  must  be  programmed  to  act  as 

“Masters”  or  as  “Slaves.”  There  are  two  Master-Slave  modes, 

Fast and Slow. 

Master-Slave Connections:

1.   Daisy chain your units via the XLR connector on the top of 

      the unit. Use standard XLR microphone cables to link your 

      units together. Remember that the Male XLR connector is the 

      input and the Female XLR connector is the output.  The first 

      unit in the chain (master) will use the female XLR connector 

      only. The last unit in the chain will use the male XLR 

      connector only.

  Pocket Scan™ Operating Instructions

©

American DJ Supply

®

  -  www.americandj.com  - Pocket Scan™ Instruction Manual Page 7

©

American DJ Supply

®

  -  www.americandj.com  - Pocket Scan™ Instruction Manual Page 10

Due to fog residue, smoke, and dust cleaning the internal and 

external optical lenses must be carried out periodically to opti-

mize light output.  
1.   Use normal glass cleaner and a soft cloth to wipe down the 

      outside casing.

2.   Use a brush to wipe down the fan grill.

3.   Clean the external optics with glass cleaner and a soft cloth 

      every 20 days.

4.   Clean the internal optics with glass cleaner and a soft cloth 

      every 30-60 days.

5.   Always be sure to dry all parts completely before plugging 

      the unit back in.
Cleaning frequency depends on the environment in which the 

fixture operates (i.e. smoke, fog residue, dust, dew). 

  Pocket Scan™ Cleaning

  Pocket Scan™ Operation Cont.

Adjusting The DMX address:

The  DMX  address  is  adjusteded  by  using  the  “1,  10,  and  100” 

keys directly below the LCD. Each press of a button will increase 

the  selected  value  of  one.  Please  note  that  each  tap  of  the 

keys  will  only  increase  the  displayed  value,  you  may  decrease 

the value.

This  function  will  reset  all  functions  to  their  default  setting.  You 

may  reset  the  fixture  by  turing  the  unit  on  and  off.  If  your  units 

are  being  controlled  through  a  DMX  controller,  you  may  also 

reset the fixtures by adjusting DMX channel seven to a value of 

240-255.

This function will automatically shut off the lamp if the shutter is 

closed for more than one minute in DMX mode. In Sound-Active 

mode  the  lamp  will  automatically  shut  off  is  their  there  is  no 

music  source  for  more  than  a  minute.  This  function  has  been 

incorporated to extend lamp life.

  Pocket Scan™ Automatic Lamp Control

  Pocket Scan™ Reset Function

Содержание DMX OPERATOR DMX-512









Отзывы: