background image

  AVIATOR SP-8™                                                  Operation

4. Once you have completed your adjust-

ments, tap the Store button. The LCD will 

display “Stor” for approximately 2 sec-

onds. This will store your DMX channel 

value in to the unit’s built-in memory.

2. Use the Edit button to select the 

channel you wish to make adjustments 

to. Each tap will  increase the channel 

by a factor of one. Pressing and holding 

down the Edit button will scroll through 

the channels rapidly.

3. While pressing and holding down the 

Edit button tap the Store button to change 

channel  state  between  “Off”  and  “Full 

On”. Each tap of the Edit button changes 

the state from “Off” to “Full On.” 

When a channel is set to “Off,” the LCD will read “o” in the last 

character of the LCD. When a channel is set to “Full On,” the LCD 

will read “ F” in the last character. 
“Full On” (“F”) will give a channel full output (intensity) regardless 

of  any  contradicting  DMX  signal.  “Off”  (“o”)  will  cut  all  output 

voltage to a selected channel regardless of DMX signal.

  AVIATOR SP-8™                           Technical Specifications

Power        Input........................................................AC 120v~50/60Hz

Channel  Output

..........................................................10A per a channel

Total      Channel      Output.........................................................30A Maximum

DMX Output................................................................3 pin female XLR

DMX Input......................................................................3 pin male XLR

Channel  Fuse........................................................................6 Amp GMA

Dimensions......................................................330mm x 192mm x 65mm

Weight...............................................................................2.9kg/6.5Lb

s

Fuse Replacement:

To reduce the risk or electric shock: Be sure to only replace with 

the exact same type fuse, unless otherwise instructed to do so 

by an authorized American DJ

®

 service technician.

©

American DJ Supply

® 

  www.americandj.com   AVIATOR SP-8™ Instruction Manual Page 14

©

American DJ Supply

® 

  www.americandj.com   AVIATOR SP-8™ Instruction Manual Page 13

Содержание AVIATOR-SP8









Отзывы: