![background image](http://html1.mh-extra.com/html/american-dj/accu-fog-1000/accu-fog-1000_user-instructions_2922961008.webp)
American DJ
®
- www.americandj.com - Accu Fog 1000 Instruction Manual Page 16
Accu Fog 1000
System Menu
American DJ
®
- www.americandj.com - Accu Fog 1000 Instruction Manual Page 15
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUTO
” is displayed, press ENTER to
confirm.
4. Now you can choose between “
AUDI
” or “
RUN
”. “
AUDI
” is
sound active mode and “
RUN
” is the auto mode. Select the
mode that you want the fixture to run in and press ENTER.
5. Press MODE/ESC to return to the main menu.
HEAT
MAIN MENU -
HEAT
- With this function you can manually switch the
heater “On” and “Off”.
1. Access the main menu.
2. Tap the UP button until “
HEAT
” is displayed, press ENTER.
3. Tap the UP button until “
HEAT
” is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
RESE
MAIN MENU -
ALL
- When you activate the reset function, the fixture will
begin the reset motion.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
ALL
” is displayed.
4. Press ENTER to reset all motors, or press MODE/ESC to
cancel and return to the main menu.
SCAN
- When you activate this reset function, the fixture
will only reset the pan/tilt motor.
Accu Fog 1000
System Menu
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
SCAN
” is displayed.
4. Press ENTER to reset the pan/tilt motors, or press MODE/
ESC to cancel and return to the main menu.
TIME
MAIN MENU -
LIFE
- With this function you can display the total running
time of the unit.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
LIFE
” is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
HEAT
- With this function you can display the running time
of the heater.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
HEAT
” is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
CLMP
- With this function you can clear the running time of
the heater.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
CLMP
” is displayed, press ENTER.
4. Press ENTER to confirm.