American Changer Bill Breaker Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 59

6
2.2 – Mounting Instructions
This machine must be installed in accordance with local codes. If you are unsure in any way what your
local codes are or unsure of anything in the following steps, please hire a licensed professional to
mount your machine.
1.
Disconnect any and all AC power going to the machine. (Unplug AC line cord from the rear of the
machine.)
2.
Note: You will need to verify with the building code enforcement to see if it is allowable to plug the
changer into a grounded outlet. If it is not, there must be 220VAC run through conduit or other
means to meet local codes to the changer. If it is not required, proceed to step #6.
3.
Have a licensed electrician run the conduit, install the new breaker, wire and help decide how the
wiring will enter the changer (from the back or the bottom).
4.
After the conduit has been installed, proceed with securing the machine to a stable structure.
5.
Find an appropriate stable structure which to secure the machine to.
6.
NOTICE: BEFORE SECURING ENSURE THE MACHINE IS LEVEL.