American Changer Bill Breaker Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 59

13
Clear these errors by printing the status information
Hgh Csst
Low Low bill sensor of the high cassette has been triggered
Mid Csst
Low
Low bill sensor of the middle cassette has been triggered
Dspns
Issue! The unit tried 10 times to dispense and failed
No Comm2
CDM No communication with the ezCDM 1000.
Counter Disagreement of the pick and eject counts
Eject
Sensor Abnormal detection of note at eject sensor after
dispensing notes
Reject Rate If more than eight notes are rejected
Eject Init Eject sensor error
Pck/Ejct
Hgh A note was picked from the high cassette and failed to
dispense
Pck/Ejct
Mid A note was picked from the middle cassette and failed to
dispense
Pick Failure Failed to pick bill
These errors must be serviced by checking the bill
dispenser
No Comm1
CDM No communication from Bill dispenser, Check USB Port 2
for RS232 device!
Distance Distance between notes in the path is out of range
Feed
Sensor Check feed sensor
Delay Eject Eject sensor error during dispensing notes
Wheel Cntr BLDC motor exceed speed limit
Expansion
Tm Delay at (Expansion module 1,2 -> DM)