7
Installing the External Keypad
The following steps are used to install the external keypad that came with the kit. This keypad is used to
navigate the programming menu as well as input values while in the programming menu. The external
keypad can also be used to input a zip code if zip code verification is enabled
Step 9: It is recommended to mount the keypad near the display. Place the keypad against door and
use a felt tip marker to mark your four mounting holes. You will also need to mark the area for the
harness to connect to the key pad.
Front View
Four Mounting Holes
Rear View
Connector for
Harness
Figure 9
