American Changer AC1178, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 23

13
Menu 01 – Print Help Menu
A list of the menus and their corresponding numbers is printed by the external printer.
Menu 02 – System Info
The payout information and configuration settings are printed by the external printer. Aside from those,
the following information is also included in the System Info printout:
Software Revision
Valid1 Status*
Valid2 Status*
Hopper #1 Status*
Hopper #2 Status*
Hopper #3 Status*
Hopper #4 Status*
Credit Status*
Printer Status*
Coin Acceptor
Bill Dispense*
Temperature Info
IP Address*
Menu 03 – Button Price*
Define the amount charged for each selection (1-4).
Menu 04 – Button Payout*
Sets up payout count for the 4 selection buttons.
Menu 05 – Enable Bill
This system only uses MDB validators. Depending on what type of MDB validator is used, the display will
only toggle between the denominations accepted by the bill validator.
Menu 06 – Payout Table*
Only bills enabled in Menu 05 will be available in this menu. Enter the # of items dispensed for each bill
denomination.
Menu 07 – Enable Hoppers
Enable or disable hoppers 1, 2, 3 and/or 4.
Menu 08 – Hopper Coin Value
Set the value of the coin being dispensed. Used only when providing tokens with change or when
selections are not in use.
Menu 09 – Enable Coin Acceptor
Select between a Pulse or ccTalk coin acceptor. Enable or disable the coin acceptor.
Pulse – Enable

High or Low
ccTalk – Enable

Coin Values